Gigabyte выпустила материнскую плату FM2+ с поддержкой DASH
Ассортимент материнских плат Gigabyte Technology для процессоров AMD FM2+ насчитывает свыше 50 моделей и их ревизий. Новым пополнением семейства Gigabyte FM2+ стала системная плата GA-F2A78M-DASHV форм-фактора microATX (244 × 244 мм), базирующаяся на связке процессорного гнезда FM2+ и чипсета A78. От похожих решений новинка отличается поддержкой сервисов DMTF DASH для настольных и мобильных систем, который реализует удалённое управление ресурсами компьютера. Наличие DASH, поддержка графических связок AMD CrossFire по формуле «x16 + x4» и контроллер Infineon TPM 2.0 — те немногие преимущества F2A78M-DASHV, которыми обладает данная плата.
Новая модель допускает установку процессоров AMD A-Series и Athlon в конструктиве FM2/FM2+ с тепловым пакетом до 100 Вт. Элементы (3+2)-канальной системы питания обходятся без радиатора, а дополнительная мощность подаётся через 4-контактный разъём ATX12V. Максимальный объём оперативной памяти DDR3-1333/. /2400 составляет 64 Гбайт (четыре модуля по 16 Гбайт). Для карт расширения предусмотрены слоты PCI Express 3.0 x16, PCI Express 2.0 x1, PCI и PCI Express 2.0 x16@x4. Разнообразия разъёмов для накопителей не наблюдается: всего доступны шесть 6-гигабитных портов SATA с поддержкой RAID-массивов уровней 0, 1, 10 и JBOD.
Среди прочего, на плате распаяны штырьковые разъёмы USB 3.0, USB 2.0, COM (все — по 2 шт.), три разъёма для подключения вентиляторов и два флеш-чипа UEFI с основной и резервной прошивками. За работу гигабитного сетевого интерфейса отвечает контроллер Realtek, а функцию аудиокодека выполняет микросхема ALC887 того же производителя.
На панели ввода-вывода находятся порты PS/2 (комбинированный), USB 2.0 (2 шт.), D-Sub, DVI-D, DisplayPort, HDMI, четыре USB 3.0 (контроллер VIA VL805), единичный RJ-45 и три разъёма Mini-Jack. Изображение может выводиться на три монитора одновременно.
Пока трудно сказать, во сколько Gigabyte оценит новую плату. Похожая бюджетная модель GA-F2A78M-HD2 стоит на Западе от €45, однако она не обладает функциями DASH и контроллером TPM 2.0. Отметим, что Gigabyte Technology — не единственная компания, которая продолжает выпуск материнских плат FM2+. Для стареющего разъёма недавно вышли устройства A88XM-A/USB 3.1 и A88X-PLUS/USB 3.1 от ASUSTeK Computer.
Ранее аналитики отмечали значительное (20–30%) снижение спроса на брендовые матплаты.
Amd dash что это
Amd Dashconfig Tool Pdf
installed. This support may be found on the OEM’s (HP, Dell, etc.) driver support website for the appropriate model. How DASHConfig Works Figure 1 describes the flow of DASHConfig. This will interact with the vendor-provided management agent (Windows Management Instrumentation, or WMI, provider); the management agent talks to the
Finally I get this ebook, thanks for all these I can get now!
cooool I am so happy xD
I did not think that this would work, my best friend showed me this website, and it does! I get my most wanted eBook
wtf this great ebook for free?!
My friends are so mad that they do not know how I have all the high quality ebook which they do not!
It’s very easy to get quality ebooks 😉
so many fake sites. this is the first one which worked! Many thanks
wtffff i do not understand this!
Just select your click then download button, and complete an offer to start downloading the ebook. If there is a survey it only takes 5 minutes, try any survey which works for you.
AMD DASH remote management configuration
DASH is similar to Intel vPro/AMT, allowing remote control of the system independent of the OS. Unfortunately, the documentation on how to set up and use it is very haphazard and confusing.
I’m using Lenovo M75q (11A4) systems.
First, enable the DASH Management option in the BIOS (PS – Lenovo’s PowerShell BIOS configuration doesn’t work for this. After I set the DASH to enabled using this method, it doesn’t actually take effect – so set it from the BIOS when you’re in front of the PC).
Now, try browsing to the system’s DASH webpage. From a different PC (not the one where you’ve enabled DASH), go to <IP address>:623 and you should be prompted to login. The default username is Administrator and the default password is Realtek (both are case sensitive). If the login is successful, you’ll see a mostly blank blue and white webpage with the Realtek logo. There’s also an HTTPS version running on port 664.
Lenovo offers both a DASH LAN driver and a Dash Client tool. Both should be installed as part of the pre-loaded OS, so you shouldn’t have to do anything unless you perform a clean install of Windows (although the Client tool doesn’t work for me anymore – I have no idea why).
The first thing you should do is change the default password. Again, from a different PC, install the DASH CLI tools from AMD. The command to change the password is:
You will receive the message “user password changed successfully” if it works.
The CLI tools can be used to manage systems, but you’ll find it easier to use AMD’s management console. After installing it, open the application, go to the Configuration tab > Settings button. In authentication schemes, enter an auth identifier (you can provide any name), set the Scheme to Digest, and enter the username and password you set earlier. For additional security, change the transport to HTTPS. Then click Validate, Save, and Close.
Now go back to the Home tab, click Discover, and enter either the system’s hostname/IP or a range of multiple IPs, then click Next. If the systems are configured correctly and the credentials are correct, the systems will show up in the list.
Realtek also has a management utility (choose the DASH console tool for Windows 7/8/10), but my initial impressions are poor (the AMD utility isn’t great, but still better than the Realtek).
Something else which tripped me up during this process was the login credentials using the DASHConfigRT tool (it’s under #2 on that page). I remember using this in the past as a more automated method of changing the password, rather than using the DASH CLI tool. Now, it always gives me an error, Could not open pipe 2 and Fail to config. The log output shows that the Dash Firmware and RtkDashClient version are both blank, and this is on a brand new out of the box system. The linked page also shows that the credentials can be configured by pressing shift-F10 during startup, which I haven’t tried.
Amd dash что это
Reddit and its partners use cookies and similar technologies to provide you with a better experience.
By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising.
By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform.
For more information, please see our Cookie Notice and our Privacy Policy .
Get the Reddit app
Troubleshooting help Subreddit for all things AMD!
HP computer with AMD 4000 series CPU has the BIOS option "AMD DASH". Can i disable this? Any URL where is a description of this feature?
I have found some apparently related information:
"DASH is an industry standard that allows system and network administrators to perform essential management tasks on business-class desktops, notebooks, and workstations from HP, regardless of their power state or operating system state. " source
"managing these device with AMD DASH (We only just found out about Intel vPro so started looking into AMD alternative)."
"AMD DASH . must be enabled for the Realtek Management Console to work properly"
if mine is not a company computer, i think i can (and maybe should) disable it.